ComposiNews
COMPOSIFLEX TO BEGIN ENERGY CONSERVATION PROJECT - posted 5/22/09
Electric rate caps are expiring on December 31st, 2010. Composiflex is being proactive in energy conservation and will begin a project to change a large portion of the production area's equipment from electric use to gas. The project is scheduled to begin the last week of June and be completed the first week in July.
COMPOSIFLEX TO PARTICIPATE AT THE PARIS AIR SHOW - posted 5/22/09
Composiflex will have a booth at the Paris Air Show. The show is celebrating its 100th year. Composiflex will share the Pennsylvania Booth which will be located in Hall 4, Stand B104. Come visit us!!!
NEW CNC PANEL SAW PURCHASED - posted 5/22/09
SCM SIGMA 90 P PLUS 3200 REAR LOADING PANEL SAW was purchased in April.
The SCM "Sigma 90 P Plus" is a precision panel saw suitable for automatic rip and cross cut operations using an electronic pusher equipped with clamps.
COMPOSIFLEX BECOMES AS9100 CERTIFIED - posted 5/22/09
Composiflex has received AS9100 Certification. Our registration date was March 14, 2009 and the Certificate was issued on April 3, 2009.
AS9100 registration recognizes Composiflex’s successful implementation of its quality management system. This registration will act as a pre-qualifier in the company’s pursuit of additional opportunities to supply composite components and sub-assemblies to customers in the aerospace market.
Composiflex Adds a New Sales Engineer - Posted 10/30/2008
We are pleased to announce that Holly English has joined Composiflex as Sales Engineer. Holly has had a successful career with leading companies including Weber Knapp, Lord Corporation, and Corry Publishing. She brings a wealth of sales and marketing capabilities having held positions including Vice President of Sales & Marketing, Director of Sales, and Senior Product Engineer.
Holly attended Penn State University and received both a Bachelor of Science degree in Mechanical Engineering and a Master of Business Administration degree.
Holly’s primary responsibility will be to provide the technical sales support needed to identify, qualify, and win new business. She will also drive several of Composiflex’s marketing projects.
|
| |
Composiflex to Pursue 2008 AS9100 Registration - Posted 09/03/2008
COMPOSIFLEX TO PURSUE 2008 AS9100 REGISTRATION for the AEROSPACE Industry
Composiflex has started the process to become AS9100 Registered. Our schedule is on track for certification in November, 2008. We’ll keep you advised!!!
|
| |
First Phase of Building Expansion Approved - Posted 09/03/2008
FIRST PHASE OF BUILDING EXPANSION APPROVED
A 19,800 Square Foot building expansion has been approved. Ground work will begin this fall with completion expected in August, 2009. This is the first of two phases for expansion. The initial expansion will increase the facility from 34,000 to 53,800 square feet. Phase II is tentatively scheduled for 2011. Ground was broken on August 21st.
|
| |
Composiflex Purchases New Gerber Cutter - Posted 09/03/2008
May, 2008 - Composiflex has purchased and installed a New Gerber Cutter. This machine is an automated, computer-controlled cutting system that replaces hand-held cutters, templates, and patterns. The cutter uses computer data files to guide its knife. It can cut up to 2.5 cm (1 inch) of compressed fabric using reciprocating knife technology. A conveyorized cutting table efficiently transfers material from the spreading table to the cutter, and cut parts are moved to the bundling area. The Gerber cutter is ideal for small-lot orders. Sophisticated sensing techniques control cutting speed for maximum quality and throughput. This results in more efficient nesting. Consistently accurate cutting gives better material utilization and reduces the amount of re-cuts necessary.
|
| |
Composiflex Purchases New Equipment/Upgrades Exist - Posted 09/03/2008
COMPOSIFLEX PURCHASES NEW EQUIPMENT/UPGRADES EXISTING EQUIPMENT
July, 2008 - A new 5-Axis Router has been acquired and installed. This machine is a DMS Gantry Style 5-Axis router with a 60"W x 120"L x 48"H machining envelope. It operates with a twelve station tool changer. The 5-Axis is utilized for machining foam, honeycomb, patterns, carbon, aluminum, and glass composites. The machine is fully programmable.
July, 2008 – Composiflex’s existing TMP press has been retrofitted to increase processing capabilities. The press is 280 Ton 48" x 80" Five (5) opening press with heating and cooling capabilities. The TMP contains a shuttle for loading/unloading. Hot oil heated for excellent temperature uniformity to 450 deg. Fahrenheit. |
| |
Composiflex Adds Two New Engineers - Posted 09/03/2008
COMPOSIFLEX ADDS TWO NEW ENGINEERS
Composiflex is pleased to announce the addition of two new engineers to our staff.
Matt Trimble has a degree in both Plastics Engineering and Mechanical Engineering and is pursuing a Master’s Degree in Manufacturing. His focus within the department will be on Ballistic applications. Matt “T” brings 15 years of experience in the engineering field.
Matt Stebick has also been added to the engineering staff. Matt “S” also has degrees in Plastics Engineering and Mechanical Engineering with 18 years in the field. Matt’s focus will be as a Facilities Engineer as well as focusing on our Industrial Spring division.
Both are graduates of Penn State.
|
| |
- - Posted 06/08/2007
Bomb Containment White Paper.pdf
Composiflex is pleased to announce the completion of our White Paper entitled "Lightweight Composite Bomb Containment Device" 6.22.07
|
| |
|
